====== Marklin 3001 ====== {{ :marklin_3001_a.png?400 |}} 3001 - Electric Shunting Loco A model of the six-wheeled 0-6-0 (C) Class E 63 locomotive on the German Federal Railways. Length 120mm "The Junk Yard Dog" Bought as not working correctly with an ESU Lokpilot 4 conversion including permanent magnet. Replaced slider, cleaned the wheels, cleaned the motor, cleaned the gears, greased the gears, resoldered the slider to decoder wire and it works great. ==== Road Number ==== E6302 ==== Spare Parts ==== Contact shoe - 7185 Rubber tyres (2) - 7153 Light bulb - 60010 ==== Digital Conversion ==== This was already equipped with an ESU Lokpilot 4 decoder and permanent magnet when purchased The conversion had been poorly done, as an example the insulation on the wire from the contact shoe to the decoder was broken through in several places. No lights were connected to the decoder, even though the Lokpilot 4 could have powered the original globes without problem. Globes have now been replaced with 3mm warm white leds front and rear. Changing automatically with direction. DIY Stay alive added. Will add cabin light on F1 (Aux 1) at a later date. ==== Decoder CV Values ==== Set by us. ^CV^Value^Designation^Notes^ |CV 1|50|Address| | |CV 17|203|Long address 1|| |CV 18|185|Long address 2|| |CV 29|50|Configuration Register|128 speed steps, disable analogue, Speed curve CV 67 - 94, Long address| Recommended by ESU. ^CV^Value^Designation^Notes^ |CV 2|3|Start Voltage| | |CV 51|0| | | |CV 52|30|Load Control Parameter <> for slow driving>>| | |CV 53|50|Control Reference Voltage| | |CV 54|40|Load Control Parameter <>| | |CV 55|175|Load Control Parameter <>| | |CV 56|200|Operating range of load control| | ==== DCC-EX Roster ==== ROSTER( 3001, "Junk Yard Dog", "Light/ / / / / / / / / / /")