====== HAG 191 ======

{{ :hag_191.jpg?400 |}}

HAG 191 Electric Railcar



https://www.hag.swiss/

==== Road Number ====

BDe 44 52


==== Spare Parts ====

==== Digital Conversion ====

Decoder - ESU Lokpilot 4 21MTC - 64614.  With 51968 adapter board.  DIY stay alive

HAG 151216-90 permanent magnet

Second carbon brush from HAG 150132-90 brush set.

Front light (white) on when going forward, off when in reverse. 3mm warm white flat top led in place of original globe.

Rear light (red) on when going in reverse, off when forward. 3mm red flat top led in place of original globe.

Passenger interior light on at all times (connect to F1 - green wire - Aux 1.  3mm warm white led in place of original globe.

==== Decoder CV Values ====

Set by us.

^CV^Value^Designation^Notes^
|CV 1|52|Address| |
|CV 17|192|Long address 1||
|CV 18|191|Long address 2||
|CV 29|54|Configuration Register|128 speed steps, enable analogue, Speed curve CV 67 - 94, Long address|
|CV 50|1|Analogue mode|AC analogue enabled|
|CV 113|255|Power Fail Bypass| |

Recommended by ESU.

^CV^Value^Designation^Notes^
|CV 2|3|Start Voltage| |
|CV 51|0| | |
|CV 52|15|Load Control Parameter <<K>> for slow driving>>| |
|CV 53|100|Control Reference Voltage| |
|CV 54|40|Load Control Parameter <<K>>| |
|CV 55|175|Load Control Parameter <<I>>| |
|CV 56|255|Operating range of load control| |


==== DCC-EX Roster ====

ROSTER( 191, "HAG 191 Railbus ", "Light/Interior Light//////////")    // Address 52, HAG 191 Railbus